Bitte drehen Sie Ihr Mobilgerät! (und wir zeigen uns von unserer besten Seite)

Alle Kategorien

Gebrauchte Kehlmaschinen aus Industrieauktionen

— 97
Sortieren nach:
  • BAIRD FOURSLIDE # 1 FOURSLIDE
    • Festpreis

    BAIRD 1


    Specification Description BASIC WIRE DIAMETER 3/32" MAX STRIP WIDTH 3/4" STANDARD FEED LENGTH 6 3/8" MOTOR 1 HPMECHANICAL CLUTCH SOLID CAMS

  • US BAIRD MODELL # 3 FOURSLIDE

    Specification Description WIRE CAPACITY 3/16" MAXIMUM WIDTH STRIP 1-1/8" FEED LENGTH 10" OPERATING SPEED 120 RPM MOTOR DRIVE 3 HP ELECTRICS 230/460/60/3 OVERALL SIZE 68" LR x 60" FB x 48" H APPROXIMATE WEIGHT 2,300 LBSMECH. CLUTCH, 14 ROLL 2 PLANE STRAIGHTENER, MOTOR DRIVE W/CONTROLS, V.S. DRIVE

  • US BAIRD MODELL # 3 FOURSLIDE

    Specification Description WIRE CAPACITY 3/16" MAXIMUM WIDTH STRIP 1-1/8" FEED LENGTH 10" W/STOPS OPERATING SPEED 120 RPM MOTOR DRIVE 3 HP ELECTRICS 230/460/60/3 OVERALL SIZE 68" LR x 60" FB x 49" H APPROXIMATE WEIGHT 2,300 LBSVERTICLE TOOL POST, MECH. CLUTCH, 14 ROLL 2 PLANE STRAIGHTENER, STOP CHECK, MOTOR DRIVE W/CONTROLS, V.S. DRIVE; FRONT, REAR, LEFT & RIGHT SLIDES TOOLING

  • NILSON S-1 FOURSLIDE
    • Festpreis

    Nilson S-1


    Specification Description WIRE DIAMETER 3/32" MAX STRIP WIDTH 1 3/8" STANDARD FEED LENGTH 8" STROKES PER MINUTE 47-234 MOTOR 1.5HP FLOOR SPACE 65" x 58"2 PLANE STRAIGHTENER SOLID CAMS VARI DRIVE

  • Info-Mailer für "Kehlmaschine"

    Info über neue Produkte als Erster im Posteingang haben. KEIN SPAM!

    Super! Ihre Anmeldung war erfolgreich.

    Super! Bitte prüfen Sie jetzt Ihr E-Mail-Postfach und bestätigen Sie Ihre Anmeldung.

  • BAIRD MODEL 104 MULTI-SLIDE
    • Festpreis

    Nilson 104


    Specification Description MAX. STOCK THICKNESS 1/32" MAX. WIDTH STRIP 7/8" STANDARD FEED LENGTH 4-1/4" SPEED RANGE 110-550 PPM FRONT SLIDE STROKE 1-1/4" LEFT SLIDE STROKE 1-3/8" RIGHT SLIDE STROKE 1-3/8" REAR SLIDE STROKE 1-1/4" STROKE OF STRIPPER 3/4-1" STANDARD HEAVY PRESS STROKE 3/8" WIDTH 4-1/4" TONNAGE 3 MOTOR 1.5 HP APPROX. WEIGHT 2200 LBS

  • NILSON S-3 FOURSLIDE
    • Festpreis

    Nilson S-3


    Specification Description WIRE DIAMETER 3/16" MAX STRIP WIDTH 1 5/8" STANDARD FEED LENGTH 15" STROKES PER MINUTE 32-130 MOTOR 3 HP FLOOR SPACE REQUIRED 79" x 62"2 PLANE WIRE STRAIGHTENER SEALED GEARS VARISPEED MOTOR AND CONTROLS SPLIT CAMS

  • NILSON S-5 FOURSLIDE
    • Festpreis

    Nilson S-5


    Spezifikation Beschreibung Durchmesser 3/8 "MAX BANDBREITE 2 3/8" STANDARD FEED LÄNGE 24 "Hüben pro Minute 16-80 MOTOR 7.5 HP NUTZFLÄCHE 84" x 150 "GEWICHT 10.500 LBSALLEN BRADLEY MICROLOGIX 1000 STEUER elektrische Bremse / Kupplung Doppel-GIBBING 2 FLUGZEUG-STRECKER Sicherheitsumzäunung EINSCHLIESSUNG

  • NILSON S3F FOURSLIDE
    • Festpreis

    Nilson S3F


    Spezifikation Beschreibung Drahtdurchmesser 3/16 "MAX BANDBREITE 2" STANDARD FEED 15 LÄNGE "STROKE PRO MINUTE 32-130 TONNAGE 20 BILDEN Bett Opening 8 1/2" x 6 1/2 "MOTOR 3 HP NUTZFLÄCHE 72" x 110 " GEWICHT 5000 LBS

  • 4-Seitenhobelmaschine
    • Festpreis

    4-Seitenhobelmaschine

    Italien

    Baujahr: 2002


    Bj.: 2002 5 Spindeln + Faseaggregat 230x120mm

  • Gebraucht Wadkin 1989 Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Zu Verkaufen Schweden
    • Festpreis

    Gebraucht Wadkin 1989 Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Zu Verkaufen Schweden

    Schweden

    Baujahr: 1989


    6 head Planer/moulder Wadkin type 7" FB 180 Equipped with universal (multi purpose head) Max size of finished work 180 x 100 mm Max. feed speed: 45 m/min Spindle layout: 1. Horizontal botton spindle, 7.5 kW 2. Horizontal top spindle, 7,5 kW 3. Vertical spindle left, 7,5 kW 4. Vertical spindle right, 7,5 kW 5. Horizontal top spindle, 7,5 kW 6. Horizontal bottom spindle, 7,5 kW - Jointers for spindle 1 Slightly used and in excellent condition

  • Gebraucht WEINIG 9999 Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Zu Verkaufen Italien
    • Festpreis

    Gebraucht WEINIG 9999 Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Zu Verkaufen Italien

    Italien


    8 Shafts With safety cabin

  • Gebraucht WEINIG PROFIMAT 23 E 9999 Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Zu Verkaufen Italien
    • Festpreis

    WEINIG Profimat

    Italien


    MOULDER BRAND WEINIG MOD. PROFIMAT 23 E CONFIGURATION with nr. 6 shafts Inferior kw 4 Right - Left kw 7.5 Superior kw 5.5 Superior kw 4 Inferior with equipment for to cut timber kw 22 total power kw 45 Smooth plan Working width mm. 230 Feeding unit for short pieces new tools included new 10 blades included with reference guides special price all inclusive

  • Moulder WEINIG UNIMAT 23E
    • Festpreis

    WEINIG Unimat

    Polen

    Baujahr: 1996


    Moulder WEINIG UNIMAT 23E - Year 1996 - Made in Germany - Serviced by the company Weinig Technical data: - Machine-head with 6 spindles Ø 40 mm - For wood dry and wet - 3 pinch rolls on the counter - All spindles are adjustable Spindle alignment: - BOTTOM RIGHT + RIGHT + + + TOP BOTTOM 1. The head horizontal lower engine power 4 kW 2. The head vertical right engine power 4 kW 3. The head vertical left engine power 4 kW 4. Vertical head right motor power 4 kW 5. The head horizontal upper motor power 11 kW 6. The head horizontal lower motor power 11 kW - Working width 230 mm - Working height 160 mm - Feed speed 5-36 m / min - Feed speed adjustable on the inverter - Feeding motor power of 5.5 kW - 6000 obr.na minute !!! - FOR WET !!! - Roller feeders densely embedded 8 pieces of steel + 2 rubber - Possibility of cut short workpieces - Lubrication - Pneumatic sliding head (second right and top) - Feed on cardan shafts - Feed table 190 cm

  • Und MOLDURERA 4-Kopf
5-Motoren - B
    • Festpreis

    Und MOLDURERA 4-Kopf 5-Motoren - B

    16.886 € $ 18.000 £ 14.590

    Moulder mit 4-Achs und 5-Motoren; 1 Motor mit 10 PS grueseadora, 3-Motoren und Tupis 5.5 grueseadora HP und 1 Motor 1,5 PS Fütterung, mechanischen Druck

  • Gebraucht Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Zu Verkaufen Rumänien
    • Festpreis

    a-lima-bis 310

    Rumänien


    Four girls processing machine model 310 Year A.COSTA year fab.2000 WORLD 10 processing engines, hydraulic work progress, fixing axes is made with hydro bushings to avoid vibrations during processing and supply and exhaust system automatically Price: on request The validity period: unlimited - Translated with google

  • Moulder WEINIG UNIMAT 23 EL
    • Festpreis

    WEINIG Unimat

    Polen

    Baujahr: 1998


    Moulder WEINIG UNIMAT 23 EL - The machine in stock - After the technical review - The state machine - IDEAL - Serviced by GERMAN WEINIG SERVICE COMPANY TECHNICAL PARAMETERS : - Working width 230 mm - Working height 200 mm - Feed speed 7 - 36 m / min - 8-head machine with a diameter of 40 mm spindles fi - For wood wet and dry - Drive 4 rolls in the lower table - All spindles are adjustable scraper System heads: 1) head horizontal lower 7.5 kW 2) head vertical right 11 kW 3) head vertical left 11 kW 4) The head vertical right 11 kW 5) The head vertical left 11 kW 6) The head of the horizontal top 11 kW 7) The head horizontal lower 7.5 kW 8) Universal head rotates into account 360 11 kW The SET orginalna PLATES REPLACEMENT FOR feeding table - The engine feed 5.5 kW - The engine of 2.2 kW lifting heads - The machine equipped with cutter zaoblania corners adjustable - 8 rolls pulling the upper gear - Electric height adjustable planing - All engines have the brake - The diameter of the sucti

  • Weinig Unimat 23 SP
    • Festpreis

    WEINIG Unimat

    Polen

    Baujahr: 2005


    Weinig Unimat 23 SP TECHNICAL PARAMETERS : - Workpiece width min / max 20/230 mm - The height of the workpiece min / max 10/90 mm - Maximum diameter of the tool 350 mm - The diameter of 180 mm min tool - Spindle diameter 50 mm - The maximum distance from the table saw 80 mm - Main engine power 2 x 22 kW - Engine power feed 7.5; kW - Rotation speed 5600 RPM spindle - Feed speed 6-36 m / min - Automatic central lubrication - 3 steel rollers in the lower countertop - 4 rubber rollers pulling the top - Size rollers feeding rollers ø 140 x 50, 30, 20, 15 x ø 35 mm - Needed pressure of 6 bar / 10 bar - Nominal pressure of 8 bar The machine dedicated to system manufacturers of garden or producers floorboard to produce lamella. High-performance machine for multi-layer parquet, three-layer boards, etc. Perfect surface quality of the product tolerance + / _ 0.1mm ball with a kerf of 1.2 mm (depending on width) the highest precision for both the machine and the final product optimal solution for

  • Moulder WEINIG Profimat 22 N
    • Festpreis

    WEINIG Profimat

    Polen

    Baujahr: 1999


    Moulder WEINIG Profimat 22 N - The machine in stock - Reconditioned - Fully operational - ready to work - German production - known reputable brand WEINIG - The machine is not painted, original paint - USER MANUAL > - SERVICED BY WEINIG - Max workpiece width 22cm - Max workpiece height 14 cm - 5 spindles: 1) horizontal bottom 22cm, 4 kW 2) vertical right 14cm 3) vertical left 14cm (right and left 7.5 kW) 4) horizontal top 22cm, 4 kW 5) horizontal bottom 22cm, 4 kW - All heads adjustable up / down, right-left - The diameter of the spindle fi 40mm - Gear shafts extending from the top 4 of this double - Shaft discharge in advance pull the rubber - Shaft discharge from the rubber bottom in the table pulling - Feed on cardan shafts - Infinitely adjustable feed 6-22 m / min - Feed motor 2.2kW - Automatic thickness adjustment planing motor 0,25kW - Electric adjustment thickness planing - Machine is equipped with electric brakes - Central lubrication top - The length of the countertop introduc

  • MOLDURERA Omil 6 ACHSEN
    • Festpreis

    MOLDURERA Omil 6 ACHSEN

    16.886 € $ 18.000 £ 14.590

    Moulder mit 6 Achsen und 6 PS-Motoren 12,5 und 1 Motor mit einer Frequenz von 2,5 HP zugeführt wird; Druck neumatica

  • Gebraucht LEADERMAC HYPERMAC 923 2005 Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Zu Verkaufen Italien
    • Festpreis

    Leadermac HYPERMAC 923

    Italien

    Baujahr: 2005


    Year of production 2005 8 Shafts + 1 universal, diameter mm. 40 3 Electronically adjustable groups 1 Electrically adjustable group in position Working width mm. 230 Length of entry plan mm. 800 Motors power KW 7.5 Motors power 9th shaft KW 11 8000 RPM on 4th, 5th and 8th shaft Pulling roller can be inclined up to 45° Inclinable feeding crossbar Feeding speed 40 mt/min adjustable with inverter Piece introducer

  • 2 sided planer REX U-41K
    • Festpreis

    2 sided planer REX U-41K

    Polen

    Baujahr: 2004


    2 sided planer REX U-41K - Year built 2004 - Good technical condition - In stock TECHNICAL PARAMETERS : - The width of a treating 2 x 410 mm - The amount of a treating 10 - 260 mm - Number of spindles 2 - Spindle configuration bottom-up - The speed of spindle 5200 U / min - 11-11 kW engine horsepower - Variable feed 5 - 45 m / min - Adjusts the front top - Adjust the table up / down 4 cylinders - TABLE PODNOSZONY POWER; UP AND DOWN - 3 pinch rolls countertop LOWER INCLUDING: 1 GEAR, 2 SMOOTH - 2 ROLLS AUXILIARY - 2 pinch rolls UPPER - 1 draw roller SOFT TOP NUMBER OF KNIFE: - At the top shaft - 4 pieces - The shaft bottom - 4 pieces - Diameter of suction fi 100 - Power feed 3 kW - Feed Kardan - Total installed capacity of 38 KW - Feeders at the entrance - Receiving the output Feeders The line consists of: Roller conveyor: - A length of about 21 m. - Working width 1100 mm, - With electric drive 3 strings - With manual control for 4 sections of the track, 1 galvanized protective wall, wi

  • Moulder PERFECT
    • Festpreis

    Moulder PERFECT

    Polen

    Baujahr: 2009


    Moulder PERFECT TECHNICAL PARAMETERS : working width 18 - 200 mm - Working height 8 - 120 mm - 4 spindles - Spindle diameter Ø 40 mm - Speed 6000 U / min - Infinitely variable speed posuwu- 6 - 24 m / min - Spindle alignment bottom max. Ø 145 mm - Right vertical spindle max. Ø 180 mm - Left vertical spindle max. Ø 180 mm - Spindle planer upper max. Ø 180 mm - The power of spindles: 1. lower 5.5 kW 2. Right vertical 4,0 kW 3. The left vertical 4,0 kW 4. top 5.5 kW - The power of the engine feed 3.0 kW - Engine power bills. of 1.1 kW - Total power of 23.1 kW - Feeding table length 1600 mm - Feed rollers 140 x 35 x 50 mm 140 x 35 x 20 mm 140 x 35 x 16 mm - Compressed air connection max. 6 bar - The diameter of the exhaust nozzles 4 x 130 mm dimensions: - The length of 3650mm - Width 1635mm - Height 1,730 mm - Weight 3000 kg

  • MOULDERS LEADERMAC COMPACT 623
    • Festpreis

    MOULDERS LEADERMAC COMPACT 623

    Polen

    Baujahr: 2008


    MOULDERS LEADERMAC COMPACT 623 - The machine in stock - After the technical review - Prepared to work - PRODUCTION YEAR 2008 - Working width 20-230 mm - Planing height 8-150 mm - Spindle Ø 40 mm - Threaded Spindles - Feed the gearmotor infinitely adjustable 4-32m / min - AUTOMATIC HEIGHT ADJUSTMENT planing - AUTOMATICALLY ADJUSTABLE planing width - Spindles equipped with brakes - MACHINE WITH CONTROL PANEL Spindles 6 pieces arranged: BOTTOM LEFT + RIGHT + + + TOP TOP + BOTTOM 1) spindle horizontal bottom - 7.5 kW 6000 RPM 2) Spindle vertical right - 8.6 KW 6000 RPM 3) The spindle vertical left - 7.5 kW 6000 RPM 4) The upper horizontal spindle - 12.6 kW 6000 RPM 5) spindle horizontal top - 8.6 kW 6000 RPM 6) spindle horizontal bottom - 11.4 kW 6000 RPM - Engine thrust power of 4.5 kW - Adjustment motor of 1.1 kW - The total power of 63 kW - Automatic central lubrication - Automatic adjustment of the right head - The three pinch rolls in the lower Balaci - Six upper rolls of steel stretc

  • Moulder Weinig Unimat 23
    • Festpreis

    WEINIG Unimat

    Polen

    Baujahr: 1996


    Moulder Weinig Unimat 23 - Year 1996 - Made in Germany - Serviced by the company Weinig Technical data: - Machine-head with 6 spindles Ø 40 mm - For wood dry and wet - 2 pinch rolls on the counter - All spindles are adjustable Spindle alignment: - BOTTOM LEFT + RIGHT + + + TOP BOTTOM + TOP 1. The head horizontal lower engine power of 7.5 kW 2. The head vertical right engine power of 7.5 kW 3. The head vertical left engine power of 7.5 kW 4. The head horizontal upper motor power 11 kW 5. The head horizontal lower engine power of 7.5 kW 6. The head horizontal upper motor power of 7.5 kW It is possible to change the last head from the top to the bottom The SET orginalna PLATES REPLACEMENT FOR feeding table - Working width 230 mm - Working height 160 mm - Feed speed 5-36 m / min - Feed speed adjustable on the inverter - Feeding motor power 4 kW - Roller feeders densely embedded 8 pieces of steel + 2 rubber - Possibility of cut short workpieces - Automatic central lubrication - Electrically

  • Moulder Weinig Hydromat 23
    • Festpreis

    WEINIG Hydromat 23

    Polen

    Baujahr: 1996


    Moulder Weinig Hydromat 23 - The machine in stock - perfect condition - Like a new machine - He worked 200 hours - Complete documentation - CE Technical parameters: - Planing width 230 mm - Planing height 140 mm - Adjustable feed - Year 1996 - 6000 RPM spindle rotation - Feed on hydraulic motors - The power of the hydraulic pump 15 kW - Feed speed of 6-60 m / min system heads: Bots + RIGHT + LEFT + RIGHT TOP + + + bots bots 1) kW spindle dolne11 2) 11 kW spindle right 3) The spindle left 11 kW 4) The right spindle 7,5 kW 5) The upper spindle 11 kW 6) Lower the spindle 7.5 kW 7) lower spindle 11 kW - LOGOPAC system (CAS) - CAS computer with LCD displays on the spindles to display the dimensions of the profiles - The possibility of programming tools - Possibility to program profiles - Horizontal heads feature jointery - Automatic central lubrication - Seven steel upper rollers - The top four rubber rollers - Five rolls in counter - Comb damping Overall dimensions machine: - Length 800 cm

  • Gebraucht WEINIG UNIMAT 23 EL 1999 Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Zu Verkaufen Italien
    • Festpreis

    WEINIG Unimat

    Italien

    Baujahr: 1999


    6 Shafts Working width mm. 230 With cutter loader FRIULMAC and conveyor belts for piece return

  • MOLDUIRERA VON 7 HEADS
    • Festpreis

    MOLDUIRERA VON 7 HEADS

    23.453 € $ 25.000 £ 20.265

    Moulder Köpfe 7 9 Motoren; 6. Oktober HP und 1. Mai HP-Achsen, 1 Motorhöhenverstellung und 0,75 Hp 1 HP 2.5 Feed mit Geschwindigkeit und presure

  • Moulder WEINIG Profimat 22 N
    • Festpreis

    WEINIG Profimat

    Polen

    Baujahr: 1993


    Moulder WEINIG Profimat 22 N - The machine in stock - Reconditioned - Technical documentation DTR - Max workpiece width 22cm - Max workpiece height 12cm 4 SPINDLE 1 horizontal bottom 22cm - 4 kW 2 vertical right, 3 left vertical - 5.5 kW 4 horizontal top 22cm - 4 kW - All heads adjustable up / down, right-left - The diameter of the spindle fi - 40 mm - 4 pulling rollers toothed, upper - Shaft discharge from the top rubber, pulling - Shaft discharge in the lower table rubber wide, stretching - FEED shafts Karde - Infinitely adjustable feed 4-20 m / min - Engine feed 1.5 kW - Total power of 22 KW - AUTOMATIC SETTING THICKNESS planing - Central lubrication top - The length of the countertop introducing 197 cm - The diameter of the exhaust nozzles 1x140mm, 3x 120mm - Closed cabin dimensions: - Length 230 cm - Width 130cm - Height 140 cm - The weight of about 2000kg

  • Moulder WINTER MBQ 418E
    • Festpreis

    Moulder WINTER MBQ 418E

    Polen

    Baujahr: 2007


    Moulder WINTER MBQ 418E TECHNICAL PARAMETERS : - Max width 18cm - Minimum width 2cm - Maximum thickness of 12cm Working - Minimum thickness of 0.8cm Working - Minimum length of the workpiece one 53cm - At least the length of the workpiece in a 30cm * 4 Spindle 1) horizontal bottom 18cm, 4kW 2) vertical right 12cm, 4kW 3) vertical left 12cm, 4kW 4) horizontal top 18cm, 5.5kW - All heads adjustable up / down, left / right - 4cm diameter spindles - The pressure of the material 2 and 3 of the head - From 3 head pressure keeping function - Pressure material - The top 6 rollers stretching, gears, metal, wide including 2 double - From the top lead-out roller rubber, pulling - From the bottom of the shaft introductory towing gear, torsion - From the bottom of the shaft lead-out towing smooth - Advance rollers pressed peumatycznie - The length of the countertop introducing 159cm - Feed on cardan shafts - Smooth regulation of feed speed 0-11m / min - Feed motor 2.2kW - Electric adjustment thickn

  • Gebraucht Weining 23 - EL 8 Alberi 2003 Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Zu Verkaufen Rumänien
    • Festpreis

    Weining 23 EL 8 alberi

    Rumänien

    Baujahr: 2003


    Weining Unimat 23 EL 8 Trees: 1st Inf 5.5 Kw; 1st Dx 4.0 Kw; 1st Left 5,5 Kw; 2nd Dx 4.0 kw; 1 Sup Kw 11.00; 2nd Inf 5.5 kw; 2nd Sup 7.5 Kw; 3rd Inf Kw 7.5 - Translated with google

  • Moulder sided SVITAWA
    • Festpreis

    Moulder sided SVITAWA

    Polen

    Baujahr: 1994


    Moulder sided SVITAWA - The machine in stock - After the technical review - ready to work - Stan bdb TECHNICAL PARAMETERS - Max planing width 500 mm - Max height of cut - sided 170 mm - Mac height of cut - on four 150 mm - 2 horizontal shafts 4 Knife - The diameter of vertical spindles fi 40 - 3 upper shafts extending - 3 lower shafts extending - Adjustable rollers in the counter - TABLE ADJUSTABLE UP DOWN - POWER - ELECTRIC SPINDLE VERTICAL RIGHT PITCH - Adjusting the upper clamp - Upper shaft - motor power 7.5 KW - Lower shaft - motor power 5.5 KW - Spindles - engines with a capacity of 2 x 4 KW - The diameter of the suction nozzles 3 x 150 mm Overall dimensions machine: Length 1900 mm Width 1900 mm Height 1800 mm

  • Moulder TOS Svitawy type FWH 18
    • Festpreis

    Moulder TOS Svitawy type FWH 18

    Polen

    Baujahr: 2000


    Moulder TOS Svitawy type FWH 18 - The machine in stock - Reconditioned - very good condition Technical parameters: - Planing width 180 mm - Planing height 120 mm - Four heads - Engines 4 x 4.6 kW - Electrically adjustable height of cut - Feed on cardan shafts - Four toothed steel rollers Tension - One rubber roller pulling - The lower roll in the counter "output" - Spindle diameter 40 mm - Two types of feed speed - Adjustable heads - Comb damping - Pre-length tops 200 cm - Diameter of spindle 4 x 120 mm - Year 2000 Overall dimensions machine: - Length 330 cm - Width 150 cm - Height 180 cm - Weight 1850 kg

  • MOULDERS LEADERMAC COMPACT 623
    • Festpreis

    MOULDERS LEADERMAC COMPACT 623

    Polen

    Baujahr: 2008


    MOULDERS LEADERMAC COMPACT 623 - The machine in stock - After the technical review - Prepared to work - PRODUCTION YEAR 2008 - Working width 20-230 mm - Planing height 8-150 mm - Spindle Ø 40 mm - Threaded Spindles - Feed the gearmotor infinitely adjustable 4-32m / min - AUTOMATIC HEIGHT ADJUSTMENT planing - Spindles equipped with brakes - MACHINE WITH CONTROL PANEL Spindles 6 pieces arranged: BOTTOM LEFT + RIGHT + + + TOP TOP + BOTTOM 1) spindle horizontal bottom - 12.6 kW 6000 RPM 2) Spindle vertical right - 8.6 KW 6000 RPM 3) The spindle vertical left - 12.6 kW 6000 RPM 4) The upper horizontal spindle - 12.6 kW 6000 RPM 5) spindle horizontal top - 6.3 kW 6000 RPM 6) spindle horizontal bottom - 8.6 kW 6000 RPM - Engine thrust power of 4.5 kW - Adjustment motor of 1.1 kW - The total power of 67 kW - Centralized lubrication - Countertops chrome - The three pinch rolls in the lower Balaci - Six upper rolls of steel stretching - Three rubber roller upper pulling - Pneumatic clamps feed r

  • Moulder Gubisch AG / GS 220
    • Festpreis

    Moulder Gubisch AG / GS 220

    Polen

    Baujahr: 1999


    Moulder Gubisch AG / GS 220 - The machine in stock - After the technical review - Prepared to work - PRODUCTION YEAR 1997 TECHNICAL PARAMETERS : - Working width 20-220 mm - Planing height 8-120 mm - For wood WET - Spindle Ø 40 mm - Threaded Spindles - Roll the counter before the first head - Feed the gearmotor infinitely adjustable 4-32m / min - ELECTRIC HEIGHT ADJUSTMENT planing - Spindles equipped with brakes - MACHINE WITH CONTROL PANEL Spindles 5 pieces arranged: BOTTOM LEFT + RIGHT + + + TOP BOTTOM 1) spindle horizontal bottom - 7.5 kW 6000 RPM 2) Spindle vertical right - 7.5 KW 6000 RPM 3) The spindle vertical left - 7.5 kW 6000 RPM 4) spindle horizontal top - 7.5 kW 6000 RPM 5) spindle horizontal bottom - 7.5 kW 6000 RPM - Motor feed 4 kW - Motor height adjustment 0.37 - Total power 63kW - Centralized lubrication - The three pinch rolls in the lower Balaci - Five of upper rolls of steel stretching - Two rubber rollers, pulling the top - Pneumatic clamps feed roller - Drive shaft

  • Planer WEINIG POWERMAT 1000
    • Festpreis

    WEINIG Powermat 1000

    Polen

    Baujahr: 2008


    Planer WEINIG POWERMAT 1000 - In stock - Serviced by GERMAN WEINIG SERVICE COMPANY TECHNICAL PARAMETERS : - Working width 20 -230 mm - Working height 8 -160 mm - Spindles 50mm - Feed 6-30 m / min adjustable - Pneumatically załanczana roller before the 1st bottom tool "high- low" - The engine feed 7.5 kW - Automatic adjustment of thickness planing motor 0.75 kW - Spindles - 8 pieces arranged: + + BOTTOM RIGHT LEFT RIGHT + + + TOP BOTTOM + TOP + BOTTOM 1. The spindle horizontal bottom - 11 kW 8000 r / min. 2. The head of law department - 7.5 KW 8000 rev / min system, 3. Head left division - 15 kW, 8000 rev / min system, - CAS electronic digital display axial setting, 4. Right vertical spindle - 7.5 kW, - System CAS DigiSet - Electronic digital display adjustment 5. The head horizontal top - 11 kW, - CAS DigiSet - electronic digital display, - Pneumatically adjustable pressure-shoe 6. Lower horizontal - 7.5 kW, - CAS DigiSet digital display additional adjustment and - pneumatically regulk

  • Gebraucht LEADERMAC 2008 Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Zu Verkaufen Polen
    • Festpreis

    Gebraucht LEADERMAC 2008 Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Zu Verkaufen Polen

    Polen

    Baujahr: 2008


    MOULDERS LEADERMAC COMPACT 723 - The machine in stock - After the technical review - Prepared to work - Year 2008 - Working width 20-230 mm - Planing height 8-150 mm - Spindle Ø 40 mm - Threaded Spindles - Feed continuously adjustable on the drive 4-60 m / min - Automatically adjusts the height of cut - The machine controlled from the desktop Spindles 7 pieces arranged: + + BOTTOM RIGHT LEFT RIGHT + + + TOP TOP + BOTTOM 1) spindle horizontal bottom - 7.5 kW 6000 RPM 2) Spindle vertical right - 5.5 KW 6000 RPM 3) The spindle vertical left - 5.5 kW 6000 RPM 4) The right vertical spindle - 5.5 kW 6000 RPM 5) spindle horizontal top - 7.5 kW 6000 RPM 6) spindle horizontal top - 7.5 kW 6000 RPM 7) spindle horizontal bottom - 5.5 kW 6000 RPM - The engine feed 7.5 kW - Adjustment motor of 1.1 kW - The total power of 50 kW - Automatic central lubrication - Automatic adjustment of the right head - Four pinch rolls in the lower Balaci - Eight upper rolls of steel stretching - Three rubber roller

  • Moulder SCM type COMPACT 22
    • Festpreis

    Moulder SCM type COMPACT 22

    Polen

    Baujahr: 2004


    Moulder SCM type COMPACT 22 - The machine in stock - After the technical review - Very good condition - The machine of Italian SCM - Do not painted - original paint TECHNICAL PARAMETERS : - Max. planing width 220mm - Min. Planing width 25mm - Max. planing height 120mm - Length of top 2000 mm - Lower spindle 5.5 kW - Spindle right and left 7.5 kW - The spindle top 7,5 kW - Feed 1.1 kW - Feed speed 5-22 m / min - Maximum tool diameter 180 mm - Turnover on the spindle 6000 RPM - Min. Height of cut 6 mm - Spindle diameter 40 mm - Variable feed 5-22m / min. - Weight approx. 1550 kg - Four steel rollers top - One upper roll rubber Inbox - One rubber roll in the counter - Comb damping - Pneumatic clamps Machine dimensions: - Length 3400 mm - Width 1700 mm - Height 1600 mm - Weight 1800 kg

  • Gebraucht A.Costa 1999 Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Zu Verkaufen Rumänien
    • Festpreis

    Gebraucht A.Costa 1999 Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Zu Verkaufen Rumänien

    Rumänien

    Baujahr: 1999


    Coming soon!

  • Gebraucht Weinig 2001 Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Zu Verkaufen Schweden
    • Festpreis

    Gebraucht Weinig 2001 Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Zu Verkaufen Schweden

    Schweden

    Baujahr: 2001


    Speed up to 45 m/min Working width mm: 230 Planing height mm: 160 7 spindles 1.Horizontal bottom spindle 7.5 kW 2.Vertical spindle right 7,5 kw 3.Vertical spindle left 7,5 kw 4.Horizontal top spindle 7,5 kw 5.Horizontal botton spindle 7,5 kw 6.Horizontal top spindle 7,5 kw 7.Horizontal botton spindle 7,5 kw

Info-Mailer für "Kehlmaschine"

Info über neue Produkte als Erster im Posteingang haben. KEIN SPAM!

Super! Ihre Anmeldung war erfolgreich.

Super! Bitte prüfen Sie jetzt Ihr E-Mail-Postfach und bestätigen Sie Ihre Anmeldung.